Premium Products
Explore our comprehensive range of high-quality engineering products sourced from world-renowned global manufacturers.
Metering
Valves
PICV (Pressure Independent Control Valve)
The pressure independent control valve R206A (PICV), combines an automatic control of the flow rate with an optional control of the valve throught an actuator. The valve is able to regulate the flow rate and keep it constant as the differential pressure conditions vary within the hydraulic circuit in which it is installed. The valve can be used with two operating modes: • pressure independent flow rate control (with K281 actuator installed) in accordance with the thermal load requirements of the circuit section to be controlled; • limitation of the flow rate and/or shut-off of the fluid (without actuator or with R473/R473HE thermo-electric actuator installed). Flow rate adjustment is guaranteed within the declared differential pressure range, with a maintained error of ± 10 % on the controlled flow rate value. The valve is equipped with pressure outlets for measuring the differential pressure in combination with a differential pressure gauge and its own probes.
.jpg)
Balancing Valve
Balancing is essential to saving the energy used in hydronic systems. The R206B static balancing valves allow a gradual and precise regulation of the flow rate. The R206B valves have a flowmeter with calibrated orifice (Venturi principle), that is with fixed Kv. Through the pressure outlets (depending on the versions they are provided with or they are optional accessory) and a differential manometer, it allows to carefully measure the flow rate actually circulating.
Gate Valve
Gate valve with female-female connections. Suitable for use with cold water, hot water and steam at low pressure.
Y-Strainers
Inspectable Y-filters, suitable for the distribution of fluids in hydronic systems. The filters feature a metallic mesh, which was designed to prevent solid impurities from entering into the piping and, by depositing residues, reducing the width of the passage, thus increasing losses of pressure and oxidation.
.png)
Butterfly Valve
Wafer, Lug and Flanged type Butterfly Valves suitable for the isolation and regulation of fluid flow in hydronic systems. The valves feature a robust disc-and-seat design, engineered to provide reliable shut-off and efficient flow control. By enabling precise regulation and isolation of the fluid, butterfly valves help optimize system performance, reduce energy consumption, and support the safe operation of piping networks.
Other Valves
A wide range of other essential valves including Ball Valves, Check Valves, Gate Valves, Balancing Valves, Strainers, Automatic Air Vents, 2-Way Zone Valves, Flexible FCU Hoses, Drain Valves, Connectors, Joints and Unions.
Water Treatment
Magnetic Filters
Magnetite is the No. 1 contributor of cooling/heating system breakdowns. Every day corrosion occurs within a cooling/heating system and radiators. If left untreated, this magnetite (black iron oxide) can build up and cause hot spots on heat exchangers, making cooling systems inefficient and putting unnecessary strain on the chiller. With products and practices designed to put an end to corrosion and magnetite, ADEY is here to save everyone’s cooling/heating systems. Our filters, water treatment products and advice will reduce energy bills, lower maintenance costs and protect chillers for longer. ADEY manufactures the largest range of magnetic filters available on the market.
Air and Dirt Separator
Essential air and dirt separation combined with energy efficiency. ADEY’s range of Air & Dirt Separators protect chillers, pumps and fittings used in sealed heating and cooling water systems, extending the service life of pumps, control equipment and other system accessories by filtering out micro air bubbles and dirt particles from the system water without interrupting a systems operation.
Chemical Dosing Pot
Rapid and precise chemical dosing dispersal. ADEY’s range of Chemical Dosing Pots provide a safe and controlled method of introducing chemicals into sealed heating and cooling water systems whilst not interrupting a systems operation.
.png)
Water Treatment Chemicals
ADEY’s range of residential and commercial water treatment products to clean and protect your central heating/cooling systems.
HVAC Equipments
Air Handling Units
Our KLS brand KSA series air handling units optimize the indoor air quality by controlling the temperature and humidity. Thanks to its flexible design and environmentally friendly high performance, it provides comfort and superior energy savings. 21 different types of main sections and about 30 different types of cross sections.
Fan Coil Units
KLS Concealed ceilng type fan col devces are designed for all spaces requiring heating and cooling. Hospitals, business centers, hotels, residences, etc. used in places. These are devices that heat or cool the indoor air by passingg it over the cooling coil with the help of a fan.
Packaged Rooftop Units
Packaged Rooftop Unit (RTU) designed for outdoor installation with indoor ducted air distribution. Ideal for both commercial and industrial cooling applications, the KLS EPHESUS RTU delivers reliable cooling performance in ambient temperatures of up to 52°C, ensuring efficient operation even in demanding climates.
Fire Protection
Sprinklers
When a fire occurs and heat is absorbed, the thermal-sensitive liquid within the bulb expands and the internal pressure increases. When the internal pressure exceeds the strength of the glass, the glass would shatter. This results in the water discharge, which strikes the deflector and form a spray pattern to control or extinguish the fire.
Alarm Valves
UniVal’s range of Alarm Valves for Fire Protection systems. UL Listed & FM Approved Alarm Valves.
.png)
Fire Protection Valves
UniVal’s Range of Fire Protection Valves. UL Listed & FM Approved Valves.
.png)